Lõppvõimendid

VINCENT SP-T700 Class-A Hybrid Mono Poweramplifier • Frequency Response: 20 Hz – 20 kHz +/- 0.5 dB • Nominal Output Power RMS / 8 Ohm: 150 Watt • Nominal Output Power RMS / 4 Ohm: 300 Watt • Nominal Output Power Class A / 8 Ohm: 10 Watt • Harmonic Distortion: < 0.01 % (1 kHz, 1 Watt); < 0.1 % (1 kHz, 25 Watt) • Input Sensitivity: 1 V (for 25 Watt RMS at 4 Ohm) • Signal-Noise Ratio: > 90 dB • Input Impedance: > 22 kOhm • Max. Power Consumption: 306 Watt • Inputs: 1 x Mono RCA, 1 x 3.5 mm Jack (Power Control) • Outputs: 2 x 2 Speaker Terminal, 1 x 3.5 mm Jack (Power Control) • Tubes: 1 x 6S3P-EV; 1 x 6SCH9P, 1 x 6Z4 • Viimistlus: Must, Hõbedane • Kaal: 16 kg • Mõõdud: (WxHxD): 210 x 263 x 400 mm Learn More

VINCENT SP-332 Hybrid Stereo Poweramplifier • Frequency Response: 20 Hz - 20 kHz +/- 0.5 dB • Nominal Output Power RMS / 8 Ohm: 2 x 150 Watt • Nominal Output Power RMS / 4 Ohm: 2 x 250 Watt • Harmonic Distortion: < 0.1 % (1 kHz, 1 Watt) • Input Sensitivity: 1.35 Volt • Signal-Noise Ratio: > 91 dB • Input Impedance: 47 kOhm • Max. Power Consumption: 531 Watt • Inputs: 1 x Stereo RCA, 1 x Stereo XLR, 1 x 3.5 mm Jack (Power Control) • Outputs: 2 x 4 Speaker Terminal, 1 x 3.5 mm Jack (Power Control) • Tubes: 2 x 6N16, 1 x 6N15 • Colour: Black / Silver • Weight: 21 kg • Dimensions (W x H x D): 430 x 165 x 430 mm Learn More

• THX Ultra2 certified • 275 watts x 2 into 8 Ω (all channels driven) • 400 watts x 2 into 4 Ω or 2 Ω (all channels driven) • 750 watts x 1 bridged into 8 Ω or 4 Ω • 45 amps peak current per channel • 2 Ohm stable operation with load selector switch • Two pairs of speaker outputs with front panel A/B buttons • Rear-mounted lockout switch disables front A/B buttons • High pass filter, switchable for 20Hz or 40Hz • Automatic on/off by DC trigger with looping output • Automatic on/off by audio signal with 2 sensitivity settings • Fully discrete circuitry with high current toroid transformer • Bridging switch for stereo or mono operation • Efficient, low heat design • DC Servo and relay protection circuits • Rear-mounted left and right gain controls • Standby, channel status and high temperature indicators • Gold-plated RCA input jacks • Heavy duty 24k gold-plated 5-way speaker terminals Learn More

185W x 2 Rated Output Power into 8 Ohms • 340W x 2 Rated Output Power into 4 Ohms • Stereo Dynamic Power 260/490/570W @ 8/4/2 Ohms • 620W x 1 Rated Output Power into 8 Ohms Bridge Mode • Mono Dynamic Power 1000/1100W @ 8/4 Ohms • Balanced Line Inputs • Single-Ended Line Inputs • Input Level Control • Line Output for Daisy Chaining • 12V Trigger In/Out • Auto Turn-on with Selectable Threshold • Ground Lug • Detachable AC Power Cord Learn More

• Two Ncore power modules made by Hypex Electronics B.V. And tuned especially for this model • High output with a practical maximum of 260 W + 260 W (4 Ω)/170 W + 170 W (8 Ω) • Dual mono design throughout entire system • Clean signal amplification realized with a fully balanced design at the input stage • Two independent left/right high-capacity toroidal core power supply transformers • Discrete buffer amplifiers used in the input stage • Three supporting pinpoint feet that are easy to install (patent numbers 4075477 and 3778108) • Two linked VU meters which show musical pulse; with four dimmer levels and two sensitivity settings • Fan-free design to minimize noise • 12V trigger in and through for power synchronization Learn More

• 160 watts x 2 @ 8 Ω RMS, both channels driven • 240 watts x 2 @ 4 Ω RMS, both channels driven • 500 watts x 1 @ 8 Ω, in bridged mode • Circuitry designed by legendary John Curl • High bias Class A/AB operation • 45 amperes peak current per channel • Stable with speaker impedance dips below 2 Ω • Balanced inputs with discrete circuits • Heavy-duty 24k gold-plated 5-way speaker binding posts • Gold-plated RCA input & loop output jacks • Direct-coupled signal path, no capacitors or inductors • DC Servo and relay protection circuits • AC turn-on inrush surge protection with relay bypass • JFET input stage, MOSFET driver stage • 12 beta-matched 15 ampere, 60 MHz bipolar output transistors • 1.1 kVA shielded toroid transformer w/ independent windings for each channel • Independent power supplies for input stage, driver stage and output stage • 54,400 µF filter capacitors for output stages • Full power is rated all the way down to 5Hz for unrestricted low-end bass • Harris hyper-fast soft-recovery bridge diode rectifiers • Automatic turn-on by 12 V trigger or audio sensing • 2 rack space chassis with rear carry handles • Rack mount hardware available separately • Available in silver or black • Mõõdud: 437 x 105 x 432 • Kaal: 12.2 kg Learn More

• 16 Channels X 60 Watts @ 8 Ohms • Any consecutive channel pair bridgeable to 2 x 140 Watts @ 8 ohm • 2U Rack Height- saves valuable rack space • Platform accessed through IP control • Effectively handles long cable runs and difficult speaker loads • Dual global Inputs/Outputs • 5W Standby Mode, 3W Network Standby • 12V Trigger In; IR In/Out Learn More

• Platform accessed through IP control • Custom web app manages DSP calibration, IP control and more • 8 Channels x 120 Watts @ 8 ohm • Bridgeable to 4 channels x 300 Watts @ 8 ohm • Renowned NAD sonic signature • Effectively handles long cable runs and difficult speaker loads • Dual global Inputs/Outputs • 1U Rack height • 0.5W Standby Mode, 3W Network Standby • 12V Trigger In; IR In/Out • Auto Sense Turn-on • Universal AC Power Supply Learn More

• Universal amplifier for applications from 60 to 150 watts • Zone 1 (channel 1&2) are higher power for more demanding applications • 24 speaker connections (A and B outputs for all 12 channels) • High current for stable operation at 2 Ohms • Class AB input stage plus premium Class D power stage • Independent audio sensing triggers, one for each zone • 6 Independent 12 volt trigger inputs, one for each zone • Looping 12 volt trigger outputs for each zone • Master 12 volt trigger input to turn all zones on-off • Speaker level input for expanding systems w/out pre out jacks • Two bus inputs can be routed to any zone • Bus loop output jacks for passing audio to another amp • Summed Mono mode combines L and R for single speaker applications • Separate level controls for all twelve channels • Detachable speaker connectors accept up to 12 gauge wire • Short circuit and overheat protection with front panel indicators • 0.5 watt standby power consumption meets Energy Star & EU specs Learn More