Lõppvõimendid

• Output power: More than 1100 W in 8 ohms (mono) • Inputs: RCA unbalanced and XLR balanced • Speaker outputs: One pair of heavy duty gold plated terminals • Viimistlus: Must • Mõõdud: 240 x 430 x 575 (HxWxD), • Kaal: 47,4 kg Learn More

PARASOUND stereovõimendi Zamp v.3 • Võimsus: 45W @8Ω 60W @4Ω 90W @8Ω bridged • Sagedus: 5 Hz - 100 kHz, +0/-3 dB • Kõrvaklapiliides • 9-12V Trigger • Kaal 3,0 kg • Mõõdud mm: 50 x 241 x 254 (K x L x S) • Viimistlus: must Learn More

• 90 watts x 2 into 8 Ω (all channels driven) • 150 watts x 2 into 4 Ω or 2 Ω (all channels driven) • 200 watts x 1 bridged into 8 Ω or 4 Ω • 20 amps peak current per channel • 2 Ohm stable operation with load selector switch • Two pairs of speaker outputs with front panel A/B buttons • Rear-mounted lockout switch disables front A/B buttons • High pass filter, switchable for 20Hz or 40Hz • Automatic on/off by DC trigger with looping output • Automatic on/off by audio signal with 2 sensitivity settings • Fully discrete circuitry with high current toroid transformer • Bridging switch for stereo or mono operation • Efficient, low heat design • DC Servo and relay protection circuits • Rear-mounted left and right gain controls • Standby, channel status and high temperature indicators • Gold-plated RCA input jacks • Heavy duty 24k gold-plated 5-way speaker terminals • Mõõdud: 437 x 406 x 63mm • Kaal: 9.1 kg Learn More

• Universal amplifier for applications from 60 to 150 watts • Zone 1 (channel 1&2) are higher power for more demanding applications • 24 speaker connections (A and B outputs for all 12 channels) • High current for stable operation at 2 Ohms • Class AB input stage plus premium Class D power stage • Independent audio sensing triggers, one for each zone • 6 Independent 12 volt trigger inputs, one for each zone • Looping 12 volt trigger outputs for each zone • Master 12 volt trigger input to turn all zones on-off • Speaker level input for expanding systems w/out pre out jacks • Two bus inputs can be routed to any zone • Bus loop output jacks for passing audio to another amp • Summed Mono mode combines L and R for single speaker applications • Separate level controls for all twelve channels • Detachable speaker connectors accept up to 12 gauge wire • Short circuit and overheat protection with front panel indicators • 0.5 watt standby power consumption meets Energy Star & EU specs Learn More

• Two Ncore power modules made by Hypex Electronics B.V. And tuned especially for this model • High output with a practical maximum of 260 W + 260 W (4 Ω)/170 W + 170 W (8 Ω) • Dual mono design throughout entire system • Clean signal amplification realized with a fully balanced design at the input stage • Two independent left/right high-capacity toroidal core power supply transformers • Discrete buffer amplifiers used in the input stage • Three supporting pinpoint feet that are easy to install (patent numbers 4075477 and 3778108) • Two linked VU meters which show musical pulse; with four dimmer levels and two sensitivity settings • Fan-free design to minimize noise • 12V trigger in and through for power synchronization Learn More

• 16 Channels X 60 Watts @ 8 Ohms • Any consecutive channel pair bridgeable to 2 x 140 Watts @ 8 ohm • 2U Rack Height- saves valuable rack space • Platform accessed through IP control • Effectively handles long cable runs and difficult speaker loads • Dual global Inputs/Outputs • 5W Standby Mode, 3W Network Standby • 12V Trigger In; IR In/Out Learn More

ESOTERIC S-05 Stereo Power Amplifier • Speaker output: • 30W + 30W (8Ω, Class-A) • 60W + 60W (4Ω) • 120W (BTL mode, 8Ω) • Analog audio inputs: ESL-A; XLR; RCA • Mõõdud: 445 × 191 × 444mm • Kaal: 30,7kg • Viimistlus: Must: Hõbe Learn More

• 400 watts x 2 @ 8 Ω RMS, both channels driven • 600 watts x 2 @ 4 Ω RMS, both channels driven • 1200 watts x 1@ 8 Ω, in bridged mode • Circuitry designed by legendary John Curl • Ultra-high bias Class A/AB operation • 12 watts per channel of pure Class A power • 90 amperes peak current per channel • Stable with speaker impedance dips to 1.5 Ω • Balanced inputs with discrete circuits • CHK Infinium, custom 5-way speaker binding posts • Neutrik locking XLR input connectors • Vampire gold-plated RCA input & loop output jacks • Direct-coupled signal path, no capacitors or inductors • DC Servo and relay protection circuits • AC turn-on inrush surge protection with relay bypass • Dual-mono input stages with ±110 volt DC rails • JFET input stage, MOSFET driver stage • 24 beta-matched 15 ampere, 60 MHz bipolar output transistors • 1.7 kVA shielded toroid power transformer with independent windings for each channel • Independent power supplies for left & right channel input stages, driver stages, output stages • 8,880 µF Nichicon Gold Tune filter capacitors for input stages • 132,000 µF Rubycon filter capacitors for output stages • Full power is rated all the way down to 5Hz for unrestricted low-end bass • Harris hyper-fast soft-recovery bridge diode rectifiers • Automatic turn-on by 12 V trigger or audio sensing • Mõõdud:197 x 448 x 546 • Kaal: 33.1 kg Learn More

• 120 watts x4 @ 8 Ω • 150 watts x4 @ 4 Ω or 2 Ω • 8 speaker connections (A and B outputs for both channels) • High current for stable operation at 2 Ohms • Class AB input stage plus premium Class D power stage • 12 volt auto-on trigger inputs, one for each zone • Master 12V trigger input to turn all zones on-off together • Looping 12 volt trigger outputs • Speaker level input for expanding systems w/out pre out jacks • Mono mode combines L and R for single speaker applications • Separate level controls for all 4 channels Mõõdud: 437 x 406 x 63.5 mm Kaal: 5.5kg Learn More