Lõppvõimendid

- HybridDigital Purifi Eigentakt™ tehnoloogia - Pidev võimsus: 2x200W/8 Ω; 2x380W /4 Ω - Dünaamiline võimsus: 2x260W /8 Ω; 2x520W into 4 Ω - Sillatuna võimsus: 700W mono /8 Ω - XLR ja RCA sisendid - 12V trigger sisend - Mõõdud; 133 x 435 x 396 mm - Kaal; 9,7 Learn More

• Output power: More than 200 W + 200 W in 8 ohms, Dual mono • Inputs: RCA unbalanced and XLR balanced • Speaker outputs: Two pairs of heavy-duty gold plated terminals • Input Impedance: Balanced 10 kohm, unbalanced 50 kohm • Frequency response: Less than +/- 0.2 dB deviation 20 Hz - 20 kHz • Phase response: Less than 2 degrees deviation 20 Hz - 20 kHz • Finish: Black • Dimensions/weight: 145 x 430 x 370 (HxWxD), weight 18 kg Learn More

• 160 watts x 2 @ 8 Ω RMS, both channels driven • 240 watts x 2 @ 4 Ω RMS, both channels driven • 500 watts x 1 @ 8 Ω, in bridged mode • Circuitry designed by legendary John Curl • High bias Class A/AB operation • 45 amperes peak current per channel • Stable with speaker impedance dips below 2 Ω • Balanced inputs with discrete circuits • Heavy-duty 24k gold-plated 5-way speaker binding posts • Gold-plated RCA input & loop output jacks • Direct-coupled signal path, no capacitors or inductors • DC Servo and relay protection circuits • AC turn-on inrush surge protection with relay bypass • JFET input stage, MOSFET driver stage • 12 beta-matched 15 ampere, 60 MHz bipolar output transistors • 1.1 kVA shielded toroid transformer w/ independent windings for each channel • Independent power supplies for input stage, driver stage and output stage • 54,400 µF filter capacitors for output stages • Full power is rated all the way down to 5Hz for unrestricted low-end bass • Harris hyper-fast soft-recovery bridge diode rectifiers • Automatic turn-on by 12 V trigger or audio sensing • 2 rack space chassis with rear carry handles • Rack mount hardware available separately • Available in silver or black • Mõõdud: 437 x 105 x 432 • Kaal: 12.2 kg Learn More

• 250 watts x 3 @ 8 Ohms / 400 watts x 3 @ 4 Ohms • Adjustable gain for up to +6db over THX Reference level • Unbalanced RCA and balanced XLR inputs • Circuitry designed by legendary John Curl • High bias class A/AB operation • Direct coupled (no capacitors or inductors in signal path) • Complementary MOSFET driver stage and JFET input stage • 24 beta-matched 15 amp, 60 MHz bipolar output transistors • 1.5 kVA encapsulated toroid power transformer with independent secondary windings for each channel • 98,400 µF power supply filter capacitance • DC Servo and relay protection circuits • Heavy-duty 24k gold-plated 5-way speaker terminals • THX Ultra2 certified • Auto turn-on by 12v trigger or audio signal • Mõõdud: 445 x 194 x 485mm • Kaal: 29.5 kg Learn More

TEAC AP-505 lõppvõimendi • Hypex Ncore power amplifier module, tuned by TEAC • 130W + 130W of max output power, or 250W in BTL mode • 3 switchable output modes: Stereo, Bi-Amp and BTL (Bridge Tied Load/Bridged) • Fully balanced circuit design, from input to output • Power supply features large toroidal power transformer and Schottky barrier diodes • Comprehensive protection circuitry (Current surge, Over-voltage, Over-heating) • Large level meters • XLR Balanced and RCA Unbalanced analog audio inputs • Viimistlus: hõbe ja must • Kaal 4,4 kg • Mõõdud mm: 85 x 290 x 271 (K x L x S) Learn More

• 8 Channels X 150 watts @ 8 ohms • Bridgeable to 4 Channels X 365 watts @ 8 ohms • 2U Rack Height – saves valuable rack space • Platform accessed through IP control • Custom web UI manages DSP calibration, IP control and more • Dual global Inputs/Outputs • 8 Analog Inputs, 2 Optical and 2 Coaxial Inputs • 0.5W Standby Mode, 3W Network Standby • 12V Trigger In; IR In/Out • Auto Sense Turn-on • Universal AC Power Supply Learn More

ESOTERIC S-02 Stereo Power Amplifier • Rated output power 145W + 145W (8Ω);290W + 290W (4Ω) • Maximum output power: 580W + 580W (2Ω) • Analog audio inputs: 1x XLR; 1x RCA • Mõõdud: 445 × 221.5 × 489.6mm • Kaal: 48kg Learn More

PARASOUND A 21+ Stereo Power Amplifier Halo 300 watts x 2 @ 8 Ω RMS, both channels driven 500 watts x 2 @ 4 Ω RMS, both channels driven 1000 watts x 1 @ 8 Ω, in bridged mode Circuitry designed by legendary John Curl KAAL 32,2kg MÕÕDUD (WHD) 448 x 197 x 508 (546 kaablitega) Learn More

• THX Ultra2 certified • 275 watts x 2 into 8 Ω (all channels driven) • 400 watts x 2 into 4 Ω or 2 Ω (all channels driven) • 750 watts x 1 bridged into 8 Ω or 4 Ω • 45 amps peak current per channel • 2 Ohm stable operation with load selector switch • Two pairs of speaker outputs with front panel A/B buttons • Rear-mounted lockout switch disables front A/B buttons • High pass filter, switchable for 20Hz or 40Hz • Automatic on/off by DC trigger with looping output • Automatic on/off by audio signal with 2 sensitivity settings • Fully discrete circuitry with high current toroid transformer • Bridging switch for stereo or mono operation • Efficient, low heat design • DC Servo and relay protection circuits • Rear-mounted left and right gain controls • Standby, channel status and high temperature indicators • Gold-plated RCA input jacks • Heavy duty 24k gold-plated 5-way speaker terminals Learn More