Lõppvõimendid

TEAC AP-505 lõppvõimendi • Hypex Ncore power amplifier module, tuned by TEAC • 130W + 130W of max output power, or 250W in BTL mode • 3 switchable output modes: Stereo, Bi-Amp and BTL (Bridge Tied Load/Bridged) • Fully balanced circuit design, from input to output • Power supply features large toroidal power transformer and Schottky barrier diodes • Comprehensive protection circuitry (Current surge, Over-voltage, Over-heating) • Large level meters • XLR Balanced and RCA Unbalanced analog audio inputs • Viimistlus: hõbe ja must • Kaal 4,4 kg • Mõõdud mm: 85 x 290 x 271 (K x L x S) Learn More

VINCENT SP-T700 Class-A Hybrid Mono Poweramplifier • Frequency Response: 20 Hz – 20 kHz +/- 0.5 dB • Nominal Output Power RMS / 8 Ohm: 150 Watt • Nominal Output Power RMS / 4 Ohm: 300 Watt • Nominal Output Power Class A / 8 Ohm: 10 Watt • Harmonic Distortion: < 0.01 % (1 kHz, 1 Watt); < 0.1 % (1 kHz, 25 Watt) • Input Sensitivity: 1 V (for 25 Watt RMS at 4 Ohm) • Signal-Noise Ratio: > 90 dB • Input Impedance: > 22 kOhm • Max. Power Consumption: 306 Watt • Inputs: 1 x Mono RCA, 1 x 3.5 mm Jack (Power Control) • Outputs: 2 x 2 Speaker Terminal, 1 x 3.5 mm Jack (Power Control) • Tubes: 1 x 6S3P-EV; 1 x 6SCH9P, 1 x 6Z4 • Viimistlus: Must, Hõbedane • Kaal: 16 kg • Mõõdud: (WxHxD): 210 x 263 x 400 mm Learn More

VINCENT SP-332 Hybrid Stereo Poweramplifier • Frequency Response: 20 Hz - 20 kHz +/- 0.5 dB • Nominal Output Power RMS / 8 Ohm: 2 x 150 Watt • Nominal Output Power RMS / 4 Ohm: 2 x 250 Watt • Harmonic Distortion: < 0.1 % (1 kHz, 1 Watt) • Input Sensitivity: 1.35 Volt • Signal-Noise Ratio: > 91 dB • Input Impedance: 47 kOhm • Max. Power Consumption: 531 Watt • Inputs: 1 x Stereo RCA, 1 x Stereo XLR, 1 x 3.5 mm Jack (Power Control) • Outputs: 2 x 4 Speaker Terminal, 1 x 3.5 mm Jack (Power Control) • Tubes: 2 x 6N16, 1 x 6N15 • Colour: Black / Silver • Weight: 21 kg • Dimensions (W x H x D): 430 x 165 x 430 mm Learn More

• Two Ncore power modules made by Hypex Electronics B.V. And tuned especially for this model • High output with a practical maximum of 260 W + 260 W (4 Ω)/170 W + 170 W (8 Ω) • Dual mono design throughout entire system • Clean signal amplification realized with a fully balanced design at the input stage • Two independent left/right high-capacity toroidal core power supply transformers • Discrete buffer amplifiers used in the input stage • Three supporting pinpoint feet that are easy to install (patent numbers 4075477 and 3778108) • Two linked VU meters which show musical pulse; with four dimmer levels and two sensitivity settings • Fan-free design to minimize noise • 12V trigger in and through for power synchronization Learn More

• 160 watts x 2 @ 8 Ω RMS, both channels driven • 240 watts x 2 @ 4 Ω RMS, both channels driven • 500 watts x 1 @ 8 Ω, in bridged mode • Circuitry designed by legendary John Curl • High bias Class A/AB operation • 45 amperes peak current per channel • Stable with speaker impedance dips below 2 Ω • Balanced inputs with discrete circuits • Heavy-duty 24k gold-plated 5-way speaker binding posts • Gold-plated RCA input & loop output jacks • Direct-coupled signal path, no capacitors or inductors • DC Servo and relay protection circuits • AC turn-on inrush surge protection with relay bypass • JFET input stage, MOSFET driver stage • 12 beta-matched 15 ampere, 60 MHz bipolar output transistors • 1.1 kVA shielded toroid transformer w/ independent windings for each channel • Independent power supplies for input stage, driver stage and output stage • 54,400 µF filter capacitors for output stages • Full power is rated all the way down to 5Hz for unrestricted low-end bass • Harris hyper-fast soft-recovery bridge diode rectifiers • Automatic turn-on by 12 V trigger or audio sensing • 2 rack space chassis with rear carry handles • Rack mount hardware available separately • Available in silver or black • Mõõdud: 437 x 105 x 432 • Kaal: 12.2 kg Learn More

PARASOUND A 21+ Stereo Power Amplifier Halo 300 watts x 2 @ 8 Ω RMS, both channels driven 500 watts x 2 @ 4 Ω RMS, both channels driven 1000 watts x 1 @ 8 Ω, in bridged mode Circuitry designed by legendary John Curl KAAL 32,2kg MÕÕDUD (WHD) 448 x 197 x 508 (546 kaablitega) Learn More

• 400 watts x 2 @ 8 Ω RMS, both channels driven • 600 watts x 2 @ 4 Ω RMS, both channels driven • 1200 watts x 1@ 8 Ω, in bridged mode • Circuitry designed by legendary John Curl • Ultra-high bias Class A/AB operation • 12 watts per channel of pure Class A power • 90 amperes peak current per channel • Stable with speaker impedance dips to 1.5 Ω • Balanced inputs with discrete circuits • CHK Infinium, custom 5-way speaker binding posts • Neutrik locking XLR input connectors • Vampire gold-plated RCA input & loop output jacks • Direct-coupled signal path, no capacitors or inductors • DC Servo and relay protection circuits • AC turn-on inrush surge protection with relay bypass • Dual-mono input stages with ±110 volt DC rails • JFET input stage, MOSFET driver stage • 24 beta-matched 15 ampere, 60 MHz bipolar output transistors • 1.7 kVA shielded toroid power transformer with independent windings for each channel • Independent power supplies for left & right channel input stages, driver stages, output stages • 8,880 µF Nichicon Gold Tune filter capacitors for input stages • 132,000 µF Rubycon filter capacitors for output stages • Full power is rated all the way down to 5Hz for unrestricted low-end bass • Harris hyper-fast soft-recovery bridge diode rectifiers • Automatic turn-on by 12 V trigger or audio sensing • Mõõdud:197 x 448 x 546 • Kaal: 33.1 kg Learn More

• Power Output • 450 x1 watts @ 8 Ω • 850 x1 watts @ 4 Ω • 1300 x1 watts @ 2 Ω • Circuitry designed by legendary John Curl • Ultra-high bias Class A/AB operation • 25 watts of pure Class A power • Stable with speaker impedance dips below 1Ω • Bybee Music Rails™ - active high frequency filters for input stage • New John Curl driver stage employs a cascode circuit for greater open loop bandwidth & superior linearity • Gain switch to select 29 dB or 23 dB gain for optimum compatibility with high gain preamps or extremely efficient speakers • R-core transformer for input stage suppresses noise on power line • 6 massive 33,000 uF Nichicon Gold Tune filter capacitors for output stage • 22,400 uF input stage power supply filter capacitors, independent of the main power supply • Dual CHK Infinium, custom 5-way speaker binding posts for easy bi-wiring • Neutrik locking XLR balanced input & loop output jacks • Vampire 24k gold-plated RCA input & loop output jacks • Direct-coupled signal path, no capacitors or inductors in the audio path • JFET input stage, MOSFET driver stage • 24 beta-matched 15 ampere, 230V, 60 MHz bipolar output transistors • 2.1 kVA shielded toroid power transformer with premium H18 grade core • Independent power supplies for input stage, driver stage & output stage • Full power is rated all the way down to 2Hz for unrestricted low-end bass • Harris hyper-fast soft-recovery bridge diode rectifiers • REL & Nichicon Muse capacitors • DC servo & relay protection circuits • AC turn-on inrush surge protection with relay bypass • Automatic turn-on by 12 V trigger or audio sensing • 4 rack space chassis with rear carry handles • Rack mount hardware is included • Available in silver or black • Mõõdud: 197 x 435 x 546 mm • Kaal: 37.6 kg Learn More

ESOTERIC S-05 Stereo Power Amplifier • Speaker output: • 30W + 30W (8Ω, Class-A) • 60W + 60W (4Ω) • 120W (BTL mode, 8Ω) • Analog audio inputs: ESL-A; XLR; RCA • Mõõdud: 445 × 191 × 444mm • Kaal: 30,7kg • Viimistlus: Must: Hõbe Learn More