Ostukorv on tühi

Ostukorvis pole tooteid.

Lõppvõimendid

Items 1 to 5 of 10 total

  1. TEAC AP-505 lõppvõimendi

    TEAC AP-505 lõppvõimendi

    TEAC AP-505 lõppvõimendi • Hypex Ncore power amplifier module, tuned by TEAC • 130W + 130W of max output power, or 250W in BTL mode • 3 switchable output modes: Stereo, Bi-Amp and BTL (Bridge Tied Load/Bridged) • Fully balanced circuit design, from input to output • Power supply features large toroidal power transformer and Schottky barrier diodes • Comprehensive protection circuitry (Current surge, Over-voltage, Over-heating) • Large level meters • XLR Balanced and RCA Unbalanced analog audio inputs • Viimistlus: hõbe ja must • Kaal 4,4 kg • Mõõdud mm: 85 x 290 x 271 (K x L x S) Learn More
    1 699,00 €
  2. VINCENT SP-T700 Class-A Hybrid Mono Poweramplifier

    VINCENT SP-T700 Class-A Hybrid Mono Poweramplifier

    VINCENT SP-T700 Class-A Hybrid Mono Poweramplifier • Frequency Response: 20 Hz – 20 kHz +/- 0.5 dB • Nominal Output Power RMS / 8 Ohm: 150 Watt • Nominal Output Power RMS / 4 Ohm: 300 Watt • Nominal Output Power Class A / 8 Ohm: 10 Watt • Harmonic Distortion: < 0.01 % (1 kHz, 1 Watt); < 0.1 % (1 kHz, 25 Watt) • Input Sensitivity: 1 V (for 25 Watt RMS at 4 Ohm) • Signal-Noise Ratio: > 90 dB • Input Impedance: > 22 kOhm • Max. Power Consumption: 306 Watt • Inputs: 1 x Mono RCA, 1 x 3.5 mm Jack (Power Control) • Outputs: 2 x 2 Speaker Terminal, 1 x 3.5 mm Jack (Power Control) • Tubes: 1 x 6S3P-EV; 1 x 6SCH9P, 1 x 6Z4 • Viimistlus: Must, Hõbedane • Kaal: 16 kg • Mõõdud: (WxHxD): 210 x 263 x 400 mm Learn More
    2 199,00 €
  3. VINCENT SP-332 Hybrid Stereo Poweramplifier

    VINCENT SP-332 Hybrid Stereo Poweramplifier

    VINCENT SP-332 Hybrid Stereo Poweramplifier • Frequency Response: 20 Hz - 20 kHz +/- 0.5 dB • Nominal Output Power RMS / 8 Ohm: 2 x 150 Watt • Nominal Output Power RMS / 4 Ohm: 2 x 250 Watt • Harmonic Distortion: < 0.1 % (1 kHz, 1 Watt) • Input Sensitivity: 1.35 Volt • Signal-Noise Ratio: > 91 dB • Input Impedance: 47 kOhm • Max. Power Consumption: 531 Watt • Inputs: 1 x Stereo RCA, 1 x Stereo XLR, 1 x 3.5 mm Jack (Power Control) • Outputs: 2 x 4 Speaker Terminal, 1 x 3.5 mm Jack (Power Control) • Tubes: 2 x 6N16, 1 x 6N15 • Colour: Black / Silver • Weight: 21 kg • Dimensions (W x H x D): 430 x 165 x 430 mm Learn More
    2 299,00 €
  4. TEAC AP-701 Stereo/Mono Power Amplifier

    TEAC AP-701 Stereo/Mono Power Amplifier

    • Two Ncore power modules made by Hypex Electronics B.V. And tuned especially for this model • High output with a practical maximum of 260 W + 260 W (4 Ω)/170 W + 170 W (8 Ω) • Dual mono design throughout entire system • Clean signal amplification realized with a fully balanced design at the input stage • Two independent left/right high-capacity toroidal core power supply transformers • Discrete buffer amplifiers used in the input stage • Three supporting pinpoint feet that are easy to install (patent numbers 4075477 and 3778108) • Two linked VU meters which show musical pulse; with four dimmer levels and two sensitivity settings • Fan-free design to minimize noise • 12V trigger in and through for power synchronization Learn More
    3 059,00 €
  5. PARASOUND A 23+ Stereo Power Amplifier Halo

    PARASOUND A 23+ Stereo Power Amplifier Halo

    • 160 watts x 2 @ 8 Ω RMS, both channels driven • 240 watts x 2 @ 4 Ω RMS, both channels driven • 500 watts x 1 @ 8 Ω, in bridged mode • Circuitry designed by legendary John Curl • High bias Class A/AB operation • 45 amperes peak current per channel • Stable with speaker impedance dips below 2 Ω • Balanced inputs with discrete circuits • Heavy-duty 24k gold-plated 5-way speaker binding posts • Gold-plated RCA input & loop output jacks • Direct-coupled signal path, no capacitors or inductors • DC Servo and relay protection circuits • AC turn-on inrush surge protection with relay bypass • JFET input stage, MOSFET driver stage • 12 beta-matched 15 ampere, 60 MHz bipolar output transistors • 1.1 kVA shielded toroid transformer w/ independent windings for each channel • Independent power supplies for input stage, driver stage and output stage • 54,400 µF filter capacitors for output stages • Full power is rated all the way down to 5Hz for unrestricted low-end bass • Harris hyper-fast soft-recovery bridge diode rectifiers • Automatic turn-on by 12 V trigger or audio sensing • 2 rack space chassis with rear carry handles • Rack mount hardware available separately • Available in silver or black • Mõõdud: 437 x 105 x 432 • Kaal: 12.2 kg Learn More
    3 199,00 €

Items 1 to 5 of 10 total