Power amplifiers

• Output power: More than 200 W + 200 W in 8 ohms, Dual mono • Inputs: RCA unbalanced and XLR balanced • Speaker outputs: Two pairs of heavy-duty gold plated terminals • Input Impedance: Balanced 10 kohm, unbalanced 50 kohm • Frequency response: Less than +/- 0.2 dB deviation 20 Hz - 20 kHz • Phase response: Less than 2 degrees deviation 20 Hz - 20 kHz • Finish: Black • Dimensions/weight: 145 x 430 x 370 (HxWxD), weight 18 kg Learn More

• Output power: More than 1100 W in 8 ohms (mono) • Inputs: RCA unbalanced and XLR balanced • Speaker outputs: One pair of heavy duty gold plated terminals • Viimistlus: Must • Mõõdud: 240 x 430 x 575 (HxWxD), • Kaal: 47,4 kg Learn More

• Two Ncore power modules made by Hypex Electronics B.V. And tuned especially for this model • High output with a practical maximum of 260 W + 260 W (4 Ω)/170 W + 170 W (8 Ω) • Dual mono design throughout entire system • Clean signal amplification realized with a fully balanced design at the input stage • Two independent left/right high-capacity toroidal core power supply transformers • Discrete buffer amplifiers used in the input stage • Three supporting pinpoint feet that are easy to install (patent numbers 4075477 and 3778108) • Two linked VU meters which show musical pulse; with four dimmer levels and two sensitivity settings • Fan-free design to minimize noise • 12V trigger in and through for power synchronization Learn More

TEAC AP-505 lõppvõimendi • Hypex Ncore power amplifier module, tuned by TEAC • 130W + 130W of max output power, or 250W in BTL mode • 3 switchable output modes: Stereo, Bi-Amp and BTL (Bridge Tied Load/Bridged) • Fully balanced circuit design, from input to output • Power supply features large toroidal power transformer and Schottky barrier diodes • Comprehensive protection circuitry (Current surge, Over-voltage, Over-heating) • Large level meters • XLR Balanced and RCA Unbalanced analog audio inputs • Viimistlus: hõbe ja must • Kaal 4,4 kg • Mõõdud mm: 85 x 290 x 271 (K x L x S) Learn More

• 120 watts x4 @ 8 Ω • 150 watts x4 @ 4 Ω or 2 Ω • 8 speaker connections (A and B outputs for both channels) • High current for stable operation at 2 Ohms • Class AB input stage plus premium Class D power stage • 12 volt auto-on trigger inputs, one for each zone • Master 12V trigger input to turn all zones on-off together • Looping 12 volt trigger outputs • Speaker level input for expanding systems w/out pre out jacks • Mono mode combines L and R for single speaker applications • Separate level controls for all 4 channels Mõõdud: 437 x 406 x 63.5 mm Kaal: 5.5kg Learn More

NAD C 268 lõppvõimendi • 80W x 2 Continuous Power into 8 or 4 Ohms • Stereo Dynamic Power 120/200/250 @ 8/4/2 Ohms • 300W x 1 Continuous Power into 8 or 4 Ohms Bridge Mode • Mono Dynamic Power 500/540W @ 8/4 Ohms • Balanced Line Inputs • Single-Ended Line Inputs • Variable Input Level Control • Line Output for Daisy Chaining • 12V Trigger In/Out • Auto Turn-on with Selectable Threshold • Ground Lug • Detachable AC Power Cord • Kaal 7,3 kg • Mõõdud mm: 100 x 435 x 390 (K x L x S) • Viimistlus: must Learn More

PARASOUND A 21+ Stereo Power Amplifier Halo 300 watts x 2 @ 8 Ω RMS, both channels driven 500 watts x 2 @ 4 Ω RMS, both channels driven 1000 watts x 1 @ 8 Ω, in bridged mode Circuitry designed by legendary John Curl KAAL 32,2kg MÕÕDUD (WHD) 448 x 197 x 508 (546 kaablitega) Learn More

• 400 watts x 2 @ 8 Ω RMS, both channels driven • 600 watts x 2 @ 4 Ω RMS, both channels driven • 1200 watts x 1@ 8 Ω, in bridged mode • Circuitry designed by legendary John Curl • Ultra-high bias Class A/AB operation • 12 watts per channel of pure Class A power • 90 amperes peak current per channel • Stable with speaker impedance dips to 1.5 Ω • Balanced inputs with discrete circuits • CHK Infinium, custom 5-way speaker binding posts • Neutrik locking XLR input connectors • Vampire gold-plated RCA input & loop output jacks • Direct-coupled signal path, no capacitors or inductors • DC Servo and relay protection circuits • AC turn-on inrush surge protection with relay bypass • Dual-mono input stages with ±110 volt DC rails • JFET input stage, MOSFET driver stage • 24 beta-matched 15 ampere, 60 MHz bipolar output transistors • 1.7 kVA shielded toroid power transformer with independent windings for each channel • Independent power supplies for left & right channel input stages, driver stages, output stages • 8,880 µF Nichicon Gold Tune filter capacitors for input stages • 132,000 µF Rubycon filter capacitors for output stages • Full power is rated all the way down to 5Hz for unrestricted low-end bass • Harris hyper-fast soft-recovery bridge diode rectifiers • Automatic turn-on by 12 V trigger or audio sensing • Mõõdud:197 x 448 x 546 • Kaal: 33.1 kg Learn More

• 160 watts x 2 @ 8 Ω RMS, both channels driven • 240 watts x 2 @ 4 Ω RMS, both channels driven • 500 watts x 1 @ 8 Ω, in bridged mode • Circuitry designed by legendary John Curl • High bias Class A/AB operation • 45 amperes peak current per channel • Stable with speaker impedance dips below 2 Ω • Balanced inputs with discrete circuits • Heavy-duty 24k gold-plated 5-way speaker binding posts • Gold-plated RCA input & loop output jacks • Direct-coupled signal path, no capacitors or inductors • DC Servo and relay protection circuits • AC turn-on inrush surge protection with relay bypass • JFET input stage, MOSFET driver stage • 12 beta-matched 15 ampere, 60 MHz bipolar output transistors • 1.1 kVA shielded toroid transformer w/ independent windings for each channel • Independent power supplies for input stage, driver stage and output stage • 54,400 µF filter capacitors for output stages • Full power is rated all the way down to 5Hz for unrestricted low-end bass • Harris hyper-fast soft-recovery bridge diode rectifiers • Automatic turn-on by 12 V trigger or audio sensing • 2 rack space chassis with rear carry handles • Rack mount hardware available separately • Available in silver or black • Mõõdud: 437 x 105 x 432 • Kaal: 12.2 kg Learn More