Power amplifiers

• Two Ncore power modules made by Hypex Electronics B.V. And tuned especially for this model • High output with a practical maximum of 260 W + 260 W (4 Ω)/170 W + 170 W (8 Ω) • Dual mono design throughout entire system • Clean signal amplification realized with a fully balanced design at the input stage • Two independent left/right high-capacity toroidal core power supply transformers • Discrete buffer amplifiers used in the input stage • Three supporting pinpoint feet that are easy to install (patent numbers 4075477 and 3778108) • Two linked VU meters which show musical pulse; with four dimmer levels and two sensitivity settings • Fan-free design to minimize noise • 12V trigger in and through for power synchronization Learn More

• 16 Channels X 60 Watts @ 8 Ohms • Any consecutive channel pair bridgeable to 2 x 140 Watts @ 8 ohm • 2U Rack Height- saves valuable rack space • Platform accessed through IP control • Effectively handles long cable runs and difficult speaker loads • Dual global Inputs/Outputs • 5W Standby Mode, 3W Network Standby • 12V Trigger In; IR In/Out Learn More

ESOTERIC S-05 Stereo Power Amplifier • Speaker output: • 30W + 30W (8Ω, Class-A) • 60W + 60W (4Ω) • 120W (BTL mode, 8Ω) • Analog audio inputs: ESL-A; XLR; RCA • Mõõdud: 445 × 191 × 444mm • Kaal: 30,7kg • Viimistlus: Must: Hõbe Learn More

• 400 watts x 2 @ 8 Ω RMS, both channels driven • 600 watts x 2 @ 4 Ω RMS, both channels driven • 1200 watts x 1@ 8 Ω, in bridged mode • Circuitry designed by legendary John Curl • Ultra-high bias Class A/AB operation • 12 watts per channel of pure Class A power • 90 amperes peak current per channel • Stable with speaker impedance dips to 1.5 Ω • Balanced inputs with discrete circuits • CHK Infinium, custom 5-way speaker binding posts • Neutrik locking XLR input connectors • Vampire gold-plated RCA input & loop output jacks • Direct-coupled signal path, no capacitors or inductors • DC Servo and relay protection circuits • AC turn-on inrush surge protection with relay bypass • Dual-mono input stages with ±110 volt DC rails • JFET input stage, MOSFET driver stage • 24 beta-matched 15 ampere, 60 MHz bipolar output transistors • 1.7 kVA shielded toroid power transformer with independent windings for each channel • Independent power supplies for left & right channel input stages, driver stages, output stages • 8,880 µF Nichicon Gold Tune filter capacitors for input stages • 132,000 µF Rubycon filter capacitors for output stages • Full power is rated all the way down to 5Hz for unrestricted low-end bass • Harris hyper-fast soft-recovery bridge diode rectifiers • Automatic turn-on by 12 V trigger or audio sensing • Mõõdud:197 x 448 x 546 • Kaal: 33.1 kg Learn More