Lõppvõimendid

• Universal amplifier for applications from 60 to 150 watts • Zone 1 (channel 1&2) are higher power for more demanding applications • 24 speaker connections (A and B outputs for all 12 channels) • High current for stable operation at 2 Ohms • Class AB input stage plus premium Class D power stage • Independent audio sensing triggers, one for each zone • 6 Independent 12 volt trigger inputs, one for each zone • Looping 12 volt trigger outputs for each zone • Master 12 volt trigger input to turn all zones on-off • Speaker level input for expanding systems w/out pre out jacks • Two bus inputs can be routed to any zone • Bus loop output jacks for passing audio to another amp • Summed Mono mode combines L and R for single speaker applications • Separate level controls for all twelve channels • Detachable speaker connectors accept up to 12 gauge wire • Short circuit and overheat protection with front panel indicators • 0.5 watt standby power consumption meets Energy Star & EU specs Learn More

• Two Ncore power modules made by Hypex Electronics B.V. And tuned especially for this model • High output with a practical maximum of 260 W + 260 W (4 Ω)/170 W + 170 W (8 Ω) • Dual mono design throughout entire system • Clean signal amplification realized with a fully balanced design at the input stage • Two independent left/right high-capacity toroidal core power supply transformers • Discrete buffer amplifiers used in the input stage • Three supporting pinpoint feet that are easy to install (patent numbers 4075477 and 3778108) • Two linked VU meters which show musical pulse; with four dimmer levels and two sensitivity settings • Fan-free design to minimize noise • 12V trigger in and through for power synchronization Learn More

• 16 Channels X 60 Watts @ 8 Ohms • Any consecutive channel pair bridgeable to 2 x 140 Watts @ 8 ohm • 2U Rack Height- saves valuable rack space • Platform accessed through IP control • Effectively handles long cable runs and difficult speaker loads • Dual global Inputs/Outputs • 5W Standby Mode, 3W Network Standby • 12V Trigger In; IR In/Out Learn More

ESOTERIC S-05 Stereo Power Amplifier • Speaker output: • 30W + 30W (8Ω, Class-A) • 60W + 60W (4Ω) • 120W (BTL mode, 8Ω) • Analog audio inputs: ESL-A; XLR; RCA • Mõõdud: 445 × 191 × 444mm • Kaal: 30,7kg • Viimistlus: Must: Hõbe Learn More

• 400 watts x 2 @ 8 Ω RMS, both channels driven • 600 watts x 2 @ 4 Ω RMS, both channels driven • 1200 watts x 1@ 8 Ω, in bridged mode • Circuitry designed by legendary John Curl • Ultra-high bias Class A/AB operation • 12 watts per channel of pure Class A power • 90 amperes peak current per channel • Stable with speaker impedance dips to 1.5 Ω • Balanced inputs with discrete circuits • CHK Infinium, custom 5-way speaker binding posts • Neutrik locking XLR input connectors • Vampire gold-plated RCA input & loop output jacks • Direct-coupled signal path, no capacitors or inductors • DC Servo and relay protection circuits • AC turn-on inrush surge protection with relay bypass • Dual-mono input stages with ±110 volt DC rails • JFET input stage, MOSFET driver stage • 24 beta-matched 15 ampere, 60 MHz bipolar output transistors • 1.7 kVA shielded toroid power transformer with independent windings for each channel • Independent power supplies for left & right channel input stages, driver stages, output stages • 8,880 µF Nichicon Gold Tune filter capacitors for input stages • 132,000 µF Rubycon filter capacitors for output stages • Full power is rated all the way down to 5Hz for unrestricted low-end bass • Harris hyper-fast soft-recovery bridge diode rectifiers • Automatic turn-on by 12 V trigger or audio sensing • Mõõdud:197 x 448 x 546 • Kaal: 33.1 kg Learn More

• 120 watts x4 @ 8 Ω • 150 watts x4 @ 4 Ω or 2 Ω • 8 speaker connections (A and B outputs for both channels) • High current for stable operation at 2 Ohms • Class AB input stage plus premium Class D power stage • 12 volt auto-on trigger inputs, one for each zone • Master 12V trigger input to turn all zones on-off together • Looping 12 volt trigger outputs • Speaker level input for expanding systems w/out pre out jacks • Mono mode combines L and R for single speaker applications • Separate level controls for all 4 channels Mõõdud: 437 x 406 x 63.5 mm Kaal: 5.5kg Learn More

• Platform accessed through IP control • Custom web app manages DSP calibration, IP control and more • 8 Channels x 120 Watts @ 8 ohm • Bridgeable to 4 channels x 300 Watts @ 8 ohm • Renowned NAD sonic signature • Effectively handles long cable runs and difficult speaker loads • Dual global Inputs/Outputs • 1U Rack height • 0.5W Standby Mode, 3W Network Standby • 12V Trigger In; IR In/Out • Auto Sense Turn-on • Universal AC Power Supply Learn More

Võimas võimendi, millel on brigdemode võimalus ja XLR väljund. • Power output: 2x100W stereo mode 1x200W bridge mode • Frequency response: 20Hz - 50KHz • Standby consumption: <0.50W (EUP 2013) • Autostandby: Yes • Wake on signal: Yes • Input: RCA line input XLR Balanced • Output: Binding post terminals • Finish: Black • Mõõdud 195x194x70mm (WxDxH) • Kaal: 2.00kg Learn More

• Kompaktsed mõõtmed • Bluetooth • Ideaalne väikestesse ruumidesse • Väljundvõimsus RMS 2 x 10 W 8Ω / 2 x 15 W 4 Ω • Mõõtmed 159,5 x 54 x 35,5 mm • Kaal/tk 0,21 kg Learn More