STEREO

185W x 2 Rated Output Power into 8 Ohms • 340W x 2 Rated Output Power into 4 Ohms • Stereo Dynamic Power 260/490/570W @ 8/4/2 Ohms • 620W x 1 Rated Output Power into 8 Ohms Bridge Mode • Mono Dynamic Power 1000/1100W @ 8/4 Ohms • Balanced Line Inputs • Single-Ended Line Inputs • Input Level Control • Line Output for Daisy Chaining • 12V Trigger In/Out • Auto Turn-on with Selectable Threshold • Ground Lug • Detachable AC Power Cord Learn More

VINCENT SP-T700 Class-A Hybrid Mono Poweramplifier • Frequency Response: 20 Hz – 20 kHz +/- 0.5 dB • Nominal Output Power RMS / 8 Ohm: 150 Watt • Nominal Output Power RMS / 4 Ohm: 300 Watt • Nominal Output Power Class A / 8 Ohm: 10 Watt • Harmonic Distortion: < 0.01 % (1 kHz, 1 Watt); < 0.1 % (1 kHz, 25 Watt) • Input Sensitivity: 1 V (for 25 Watt RMS at 4 Ohm) • Signal-Noise Ratio: > 90 dB • Input Impedance: > 22 kOhm • Max. Power Consumption: 306 Watt • Inputs: 1 x Mono RCA, 1 x 3.5 mm Jack (Power Control) • Outputs: 2 x 2 Speaker Terminal, 1 x 3.5 mm Jack (Power Control) • Tubes: 1 x 6S3P-EV; 1 x 6SCH9P, 1 x 6Z4 • Viimistlus: Must, Hõbedane • Kaal: 16 kg • Mõõdud: (WxHxD): 210 x 263 x 400 mm Learn More

- HybridDigital Purifi Eigentakt™ tehnoloogia - Pidev võimsus: 2x200W/8 Ω; 2x380W /4 Ω - Dünaamiline võimsus: 2x260W /8 Ω; 2x520W into 4 Ω - Sillatuna võimsus: 700W mono /8 Ω - XLR ja RCA sisendid - 12V trigger sisend - Mõõdud; 133 x 435 x 396 mm - Kaal; 9,7 Learn More

• Output power: More than 200 W + 200 W in 8 ohms, Dual mono • Inputs: RCA unbalanced and XLR balanced • Speaker outputs: Two pairs of heavy-duty gold plated terminals • Input Impedance: Balanced 10 kohm, unbalanced 50 kohm • Frequency response: Less than +/- 0.2 dB deviation 20 Hz - 20 kHz • Phase response: Less than 2 degrees deviation 20 Hz - 20 kHz • Finish: Black • Dimensions/weight: 145 x 430 x 370 (HxWxD), weight 18 kg Learn More

• 160 watts x 2 @ 8 Ω RMS, both channels driven • 240 watts x 2 @ 4 Ω RMS, both channels driven • 500 watts x 1 @ 8 Ω, in bridged mode • Circuitry designed by legendary John Curl • High bias Class A/AB operation • 45 amperes peak current per channel • Stable with speaker impedance dips below 2 Ω • Balanced inputs with discrete circuits • Heavy-duty 24k gold-plated 5-way speaker binding posts • Gold-plated RCA input & loop output jacks • Direct-coupled signal path, no capacitors or inductors • DC Servo and relay protection circuits • AC turn-on inrush surge protection with relay bypass • JFET input stage, MOSFET driver stage • 12 beta-matched 15 ampere, 60 MHz bipolar output transistors • 1.1 kVA shielded toroid transformer w/ independent windings for each channel • Independent power supplies for input stage, driver stage and output stage • 54,400 µF filter capacitors for output stages • Full power is rated all the way down to 5Hz for unrestricted low-end bass • Harris hyper-fast soft-recovery bridge diode rectifiers • Automatic turn-on by 12 V trigger or audio sensing • 2 rack space chassis with rear carry handles • Rack mount hardware available separately • Available in silver or black • Mõõdud: 437 x 105 x 432 • Kaal: 12.2 kg Learn More

• 250 watts x 3 @ 8 Ohms / 400 watts x 3 @ 4 Ohms • Adjustable gain for up to +6db over THX Reference level • Unbalanced RCA and balanced XLR inputs • Circuitry designed by legendary John Curl • High bias class A/AB operation • Direct coupled (no capacitors or inductors in signal path) • Complementary MOSFET driver stage and JFET input stage • 24 beta-matched 15 amp, 60 MHz bipolar output transistors • 1.5 kVA encapsulated toroid power transformer with independent secondary windings for each channel • 98,400 µF power supply filter capacitance • DC Servo and relay protection circuits • Heavy-duty 24k gold-plated 5-way speaker terminals • THX Ultra2 certified • Auto turn-on by 12v trigger or audio signal • Mõõdud: 445 x 194 x 485mm • Kaal: 29.5 kg Learn More

TEAC AP-505 lõppvõimendi • Hypex Ncore power amplifier module, tuned by TEAC • 130W + 130W of max output power, or 250W in BTL mode • 3 switchable output modes: Stereo, Bi-Amp and BTL (Bridge Tied Load/Bridged) • Fully balanced circuit design, from input to output • Power supply features large toroidal power transformer and Schottky barrier diodes • Comprehensive protection circuitry (Current surge, Over-voltage, Over-heating) • Large level meters • XLR Balanced and RCA Unbalanced analog audio inputs • Viimistlus: hõbe ja must • Kaal 4,4 kg • Mõõdud mm: 85 x 290 x 271 (K x L x S) Learn More

• 8 Channels X 150 watts @ 8 ohms • Bridgeable to 4 Channels X 365 watts @ 8 ohms • 2U Rack Height – saves valuable rack space • Platform accessed through IP control • Custom web UI manages DSP calibration, IP control and more • Dual global Inputs/Outputs • 8 Analog Inputs, 2 Optical and 2 Coaxial Inputs • 0.5W Standby Mode, 3W Network Standby • 12V Trigger In; IR In/Out • Auto Sense Turn-on • Universal AC Power Supply Learn More

ESOTERIC S-02 Stereo Power Amplifier • Rated output power 145W + 145W (8Ω);290W + 290W (4Ω) • Maximum output power: 580W + 580W (2Ω) • Analog audio inputs: 1x XLR; 1x RCA • Mõõdud: 445 × 221.5 × 489.6mm • Kaal: 48kg Learn More

PARASOUND A 21+ Stereo Power Amplifier Halo 300 watts x 2 @ 8 Ω RMS, both channels driven 500 watts x 2 @ 4 Ω RMS, both channels driven 1000 watts x 1 @ 8 Ω, in bridged mode Circuitry designed by legendary John Curl KAAL 32,2kg MÕÕDUD (WHD) 448 x 197 x 508 (546 kaablitega) Learn More

• THX Ultra2 certified • 275 watts x 2 into 8 Ω (all channels driven) • 400 watts x 2 into 4 Ω or 2 Ω (all channels driven) • 750 watts x 1 bridged into 8 Ω or 4 Ω • 45 amps peak current per channel • 2 Ohm stable operation with load selector switch • Two pairs of speaker outputs with front panel A/B buttons • Rear-mounted lockout switch disables front A/B buttons • High pass filter, switchable for 20Hz or 40Hz • Automatic on/off by DC trigger with looping output • Automatic on/off by audio signal with 2 sensitivity settings • Fully discrete circuitry with high current toroid transformer • Bridging switch for stereo or mono operation • Efficient, low heat design • DC Servo and relay protection circuits • Rear-mounted left and right gain controls • Standby, channel status and high temperature indicators • Gold-plated RCA input jacks • Heavy duty 24k gold-plated 5-way speaker terminals Learn More

PARASOUND ZoneMaster 2 Universal 2 Channel 4 Speaker Amplifier with Sub Crossover • 120 watts x2 @ 8 Ω • 150 watts x2 @ 4 Ω or 2 Ω • 4 speaker connections (A and B outputs for both channels) • High current for stable operation at 2 Ohms • Class AB input stage plus premium Class D power stage • Audio sensing auto-on trigger • 12 volt auto-on trigger input • Looping 12 volt trigger output • Speaker level input for expanding systems w/out pre out jacks • Looping output to connect additional amplifiers • Mono mode combines L and R for single speaker applications • Separate level controls for both channels • Detachable speaker connectors accept up to 12 gauge wire • Short circuit and overheat protection with front panel indicators • 0.5 watt standby power consumption meets Energy Star & EU specs • ZoneMaster 2 Specific Features • Compact 1u, 1/2 width chassis size • Full Range Mono RCA Output • 80Hz low pass Mono RCA output (for sub) • Built in 80Hz low pass filter in bridged mode for driving in-wall/in-ceiling woofers or passive sub(s) • Mõõdud: 220 x 51(1U) x 305 mm • Kaal: 2.0kg Learn More

VINCENT SP-332 Hybrid Stereo Poweramplifier • Frequency Response: 20 Hz - 20 kHz +/- 0.5 dB • Nominal Output Power RMS / 8 Ohm: 2 x 150 Watt • Nominal Output Power RMS / 4 Ohm: 2 x 250 Watt • Harmonic Distortion: < 0.1 % (1 kHz, 1 Watt) • Input Sensitivity: 1.35 Volt • Signal-Noise Ratio: > 91 dB • Input Impedance: 47 kOhm • Max. Power Consumption: 531 Watt • Inputs: 1 x Stereo RCA, 1 x Stereo XLR, 1 x 3.5 mm Jack (Power Control) • Outputs: 2 x 4 Speaker Terminal, 1 x 3.5 mm Jack (Power Control) • Tubes: 2 x 6N16, 1 x 6N15 • Colour: Black / Silver • Weight: 21 kg • Dimensions (W x H x D): 430 x 165 x 430 mm Learn More

KLIPSCH KDA-1000 4 kanaliga tsoonivõimendi • 1000W Total System Power (4 x 250W) • High performance power platform • 70V / 100V / Low Impedance Compatibility • Mõõdud: 44mm x 483mm x 363mm • Kaal : 6.82 kg Learn More

• Output power: More than 1100 W in 8 ohms (mono) • Inputs: RCA unbalanced and XLR balanced • Speaker outputs: One pair of heavy duty gold plated terminals • Viimistlus: Must • Mõõdud: 240 x 430 x 575 (HxWxD), • Kaal: 47,4 kg Learn More

PARASOUND stereovõimendi Zamp v.3 • Võimsus: 45W @8Ω 60W @4Ω 90W @8Ω bridged • Sagedus: 5 Hz - 100 kHz, +0/-3 dB • Kõrvaklapiliides • 9-12V Trigger • Kaal 3,0 kg • Mõõdud mm: 50 x 241 x 254 (K x L x S) • Viimistlus: must Learn More

• 90 watts x 2 into 8 Ω (all channels driven) • 150 watts x 2 into 4 Ω or 2 Ω (all channels driven) • 200 watts x 1 bridged into 8 Ω or 4 Ω • 20 amps peak current per channel • 2 Ohm stable operation with load selector switch • Two pairs of speaker outputs with front panel A/B buttons • Rear-mounted lockout switch disables front A/B buttons • High pass filter, switchable for 20Hz or 40Hz • Automatic on/off by DC trigger with looping output • Automatic on/off by audio signal with 2 sensitivity settings • Fully discrete circuitry with high current toroid transformer • Bridging switch for stereo or mono operation • Efficient, low heat design • DC Servo and relay protection circuits • Rear-mounted left and right gain controls • Standby, channel status and high temperature indicators • Gold-plated RCA input jacks • Heavy duty 24k gold-plated 5-way speaker terminals • Mõõdud: 437 x 406 x 63mm • Kaal: 9.1 kg Learn More

• Universal amplifier for applications from 60 to 150 watts • Zone 1 (channel 1&2) are higher power for more demanding applications • 24 speaker connections (A and B outputs for all 12 channels) • High current for stable operation at 2 Ohms • Class AB input stage plus premium Class D power stage • Independent audio sensing triggers, one for each zone • 6 Independent 12 volt trigger inputs, one for each zone • Looping 12 volt trigger outputs for each zone • Master 12 volt trigger input to turn all zones on-off • Speaker level input for expanding systems w/out pre out jacks • Two bus inputs can be routed to any zone • Bus loop output jacks for passing audio to another amp • Summed Mono mode combines L and R for single speaker applications • Separate level controls for all twelve channels • Detachable speaker connectors accept up to 12 gauge wire • Short circuit and overheat protection with front panel indicators • 0.5 watt standby power consumption meets Energy Star & EU specs Learn More

• Two Ncore power modules made by Hypex Electronics B.V. And tuned especially for this model • High output with a practical maximum of 260 W + 260 W (4 Ω)/170 W + 170 W (8 Ω) • Dual mono design throughout entire system • Clean signal amplification realized with a fully balanced design at the input stage • Two independent left/right high-capacity toroidal core power supply transformers • Discrete buffer amplifiers used in the input stage • Three supporting pinpoint feet that are easy to install (patent numbers 4075477 and 3778108) • Two linked VU meters which show musical pulse; with four dimmer levels and two sensitivity settings • Fan-free design to minimize noise • 12V trigger in and through for power synchronization Learn More