STEREO

TEAC uus High-End toode, kus ühes korpuses on koos : Stereovõimendi, CD player, Streamer ja DAC. Supporting DSD 5.6Mhz and PCM to 192kHz, the Reference 7 can convert/up-sample signal up to to the DSD 12.2 MHz format and up-sample PCM digital signal to 384 kHz via a proprietary FPGA design. Wireless streaming, via Bluetooth supports the LDAC codec while the box also features a full-stage monaural differential circuit design, the chassis includes an ICEpower Class D amplifier. The company has mounted the DAC and the preamplifier on one side of a 10mm thick high rigidity aluminium block and the power amplifier module on the other side to lower noise and the heat radiation effect of the power amplifier. Teac also uses its own OVCS (Octa Volume Control System) to improve sound quality. It features a, “…ladder resistance switching-type volume including eight circuits. The positive and negative sides of the left and right channels are independent and further separated by two circuits in parallel, linked together.” The Reference 7 supports both Tidal and Qobuz streaming audio plus Android and iOS control apps. Finally, and you can vary the brightness of the VU meters over three settings or, indeed, turn the lighting off. Learn More

VINCENT PF-2 Power Conditioner Max. switching capacity: 2200 Watt Input: 220 - 240 V/50 Hz AC (max. 10A / 2200 W) Outputs: 2 x Schuko sockets for digital (300 W), 4 x Schuko sockets for analogue (1900 W) Colour: silver / black Weight: 2.4 kg Dimensions (W x H x D): 133 x 72 x 350 mm Learn More

• 400 watts x 2 @ 8 Ω RMS, both channels driven • 600 watts x 2 @ 4 Ω RMS, both channels driven • 1200 watts x 1@ 8 Ω, in bridged mode • Circuitry designed by legendary John Curl • Ultra-high bias Class A/AB operation • 12 watts per channel of pure Class A power • 90 amperes peak current per channel • Stable with speaker impedance dips to 1.5 Ω • Balanced inputs with discrete circuits • CHK Infinium, custom 5-way speaker binding posts • Neutrik locking XLR input connectors • Vampire gold-plated RCA input & loop output jacks • Direct-coupled signal path, no capacitors or inductors • DC Servo and relay protection circuits • AC turn-on inrush surge protection with relay bypass • Dual-mono input stages with ±110 volt DC rails • JFET input stage, MOSFET driver stage • 24 beta-matched 15 ampere, 60 MHz bipolar output transistors • 1.7 kVA shielded toroid power transformer with independent windings for each channel • Independent power supplies for left & right channel input stages, driver stages, output stages • 8,880 µF Nichicon Gold Tune filter capacitors for input stages • 132,000 µF Rubycon filter capacitors for output stages • Full power is rated all the way down to 5Hz for unrestricted low-end bass • Harris hyper-fast soft-recovery bridge diode rectifiers • Automatic turn-on by 12 V trigger or audio sensing • Mõõdud:197 x 448 x 546 • Kaal: 33.1 kg Learn More

• Frequency Response: 10 Hz – 20 kHz • T.H.D.: <0.05% (20 Hz - 20 kHz) • Input sensitivity: MM: 58 mV, MC: 6,8 mV • Signal-to-noise Ratio: MM: >81dB, MC: >69 dB • Input impedance: MM: 47 kOhm, MC: 99 - 1000 Ohm (adjustable) • Input Capacity: MM: 15 pF - 350 pF (adjustable), MC: 15 pF • Output impedance: 250 Ohm • Amplification factor: MM: 40 dB, MC: 60 dB • Inputs: 1 x Stereo RCA • Outputs: 1 x Stereo RCA, USB • Power consumption: 15 Watt • Dimensions (W x H x D): 130 x 95 x 225 mm • Weight: 2,2 kg • Tubes: 12AU7 • Colour: black/silver Learn More