STEREO
-
VINCENT KHV-200 Hybrid Headphone Amplifier
VINCENT KHV-200 Hybrid Headphone Amplifier • Frequency range: 20 Hz - 20 kHz (± 0,1 dB) • Harmonic dirtortion: < 0,01% (1 kHz; 0,1 W; 32 Ohm) • Signal-Noise Ratio: > 95 dB • Input Impedance: 33 kOhm • Max. Input Voltage: 4 Veff • Nominal Amplification Headphone Out: Low Gain: -2,66 dB, High Gain: 13,64 dB • Nominal Amplification Preamp Out: Low Gain: -11,06 dB • High Gain: 5,13 dB • Nominal Amplification Record Out: 0 dB, Inputs: 2 x Stereo RCA • Outputs: 1 x Stereo RCA (PRE OUT); 1 x Stereo RCA (REC OUT); 1x Headphone 6,3 mm Stereo jack; 1x Headphene XLR 4-pin Stereo • Power Supply: 230 V/50 Hz und 115 V/50/60 Hz (switchable) • Dimensions (W x H x D): 210 x 85 x 277 mm • Weight: 3,6 kg • Colors: Black/Silver • Tubes: 2 x E180F/6SCH9P, 1 x ECC82 Learn More -
VINCENT SA-32 Hybrid Stereo Preamplifier
VINCENT SA-32 Hybrid Stereo Preamplifier • Frequency Response: 20 Hz – 20 kHz +/- 0.5 dB, 20 Hz – 50 kHz +/- 2 dB • Nominal Output Voltage: 2 Volt • Harmonic Distortion: < 0.1 % (1 kHz, 1 Watt) • Input Sensitivity: 500 mV • Signal-Noise-Ratio: > 90 dB • Input Impedance: 47 kOhm • Max. Power Consumption: 40 Watt • Inputs: 5 x Stereo RCA, 1 x Stereo XLR • Outputs: 2 x Stereo RCA Pre Out, 1 x Stereo XLR Pre Out, 1 x Stereo RCA Rec Out, 2 x 3.5 mm Jack (Power Control) • Tubes: 4 x 6N16 • Colour: Black / Silver • Weight: 6.2 kg • Dimensions (WxHxD): 430 x 77 x 360 mm Learn More -
TEAC UD-505-X USB DAC Pre-amplifier
• Dual mono structure with one ESS Technology ES9038Q2M converter each for left and right channels • Hi-Res audio playback supporting 22.5MHz and PCM 768kHz/32-bit PCM • Fully balanced analog volume circuit with TEAC-QVCS high precision volume control • Bluetooth® receiver supporting LDAC™ and Qualcomm® aptX™ HD • Dual on-board clocks for 44.1kHz and 48kHz frequencies • 10MHz external clock input Learn More -
TEAC AX-505 Stereovõimendi
TEAC AX-505 Stereovõimendi Viimistlus: hõbe ja must Kaal 4,2 kg Mõõdud mm: 82 x 290 x 264 (K x L x S) Learn More -
TEAC AP-505 lõppvõimendi
TEAC AP-505 lõppvõimendi • Hypex Ncore power amplifier module, tuned by TEAC • 130W + 130W of max output power, or 250W in BTL mode • 3 switchable output modes: Stereo, Bi-Amp and BTL (Bridge Tied Load/Bridged) • Fully balanced circuit design, from input to output • Power supply features large toroidal power transformer and Schottky barrier diodes • Comprehensive protection circuitry (Current surge, Over-voltage, Over-heating) • Large level meters • XLR Balanced and RCA Unbalanced analog audio inputs • Viimistlus: hõbe ja must • Kaal 4,4 kg • Mõõdud mm: 85 x 290 x 271 (K x L x S) Learn More -
TEAC NT-505-X USB Network DAC Pre-amp
• Dual mono structure with one ESS Technology ES9038Q2M converter each for the left and right channels • Hi-Res audio playback supporting 22.5MHz and PCM 768kHz/32-bit PCM • Supports TIDAL, Qobuz and subscription music streaming services • Roon Ready • MQA decoder (for network streaming) • Up-conversion up to 24.5MHz DSD and 384kHz/32-bit PCM • DSD128 (5.6MHz) and PCM 192kHz/24-bit Network streaming from NAS/PC • Bluetooth® receiver supporting LDAC™ and Qualcomm® aptX™ HD • Fully balanced analog volume circuit with TEAC-QVCS high precision volume control • Original TEAC-HCLD2 enhanced-current output buffer circuit • Newly-developed “Stressless Foot” design with three support points • Semi-floating design top panel • 3.5mm 4-pole headphone jack supports separate grounding • Bulk Pet USB transferring technology with four transfer modes for various sound characters (*) • Free TEAC HR Audio Player for Windows/Mac Learn More -
VINCENT CD-S1.2 Hybrid CD-Player
• D/A Converter: 24 bit / 192 kHz • Frequency Response: 20 Hz - 20 kHz • T.H.D.: < 0.005 % • Signal-Noise-Ratio: > 94 dB • Dynamic Range: > 100 dB • Audio Output Voltage: 2.5 V • Channel Separation: > 90 dB • Max. Power Consumption: 35 Watts • Inputs: 1 x Optical, 1 x Coaxial, 1 x USB, 1 x Power Control • Outputs: 2 x Stereo RCA, 1 x Stereo XLR, 1 x Coaxial, 1 x Power Control, 1 x Headphone Jack • Tubes: 2 x 6N16 • Colour: Black or Silver • Weight: 8.5 kg • Dimensions (W x H x D): 430 x 106 x 342 mm Learn More -
TEAC CG-10M Master Clock Generator
• High-precision "TEAC Reference OCXO" – an ‘oven-controlled’ crystal oscillator • ±3 ppb frequency temperature characteristics • ±0.1 ppm frequency precision • 4 x 10MHz clock output connectors (gold-plated BNCs) • Completely independent and isolated circuit • High capacity toroidal-core power transformer • OVEN STATUS gauge for oscillation stability monitor with dimmable backlight • Patent-registered ‘Pin-Point’ feet to minimise vibrations* • Three feet for the perfect support • Full-metal body to eliminate incoming electromagnetic noise • Detachable 3-pole IEC power socket • Compatible with TEAC UD-503, UD-505, UD-701, NT-503 and NT-505 (as of March 2021) • Compliant with RoHS Learn More -
TEAC PE-505 Phono Preamplifier
• Full differential inputs/outputs circuits • High-precision RIAA EQ circuit achieves less than 0.05dB of deviation • Individual EQ curves for monaural records and ones with EQ from DECCA and COLUMBIA • Balanced MC input • Switchable MC impedance (10, 22, 47, 100, 220, 470, 1k) • Switchable MM load-impedance capacity (0, 100, 220, 330pF) • MC load-impedance measurement function • Switchable MM/MC gain (High/Low) • Subsonic detection • Subsonic filter (17Hz, -24dB/oct.) • MONO function that mixes left and right channels as a monaural channel • DEMAG function that de-magnetizes cartridge • 3-position pin-point feet • GND terminal • RoHS compliant Learn More -
Technics SL-1210GR2 Otseajamiga vinüülplaadimängija
Technics SL-1210GR2 • Südamikuta otseajamiga mootor saavutab stabiilse pöörlemise • Alumiiniumist taldrik,kaal 2,5kg • Väga jäik ja vibratsiooni summutav kahekihiline alusplaat • Kiirused: 33 1/3, 45, 78 rpm • Audio out: Phono; Maandus • Mõõdud: (WHD) 453 x 173 x 372 mm • Kaal: 11.5kg Learn More