Catalog Advanced Search
Järgnevatele otsingukriteeriumitele vastab 25 toode(t)
- KAUBAMÄRGID: PARASOUND
Ei leidnud seda mida vaja? Muuda otsingut
-
PARASOUND P 6 2.1 Channel Preamplifier & DAC Halo
PARASOUND P 6 • Frequency Response:10 Hz - 100 kHz, +0/-3 dB; 20 Hz - 20 kHz, +0/-0.5 dB • Burr-Brown analog resistor ladder volume control • Dimmable front panel volume display • Coax & optical inputs accept PCM up to 192kHz/24-bit • USB input decodes Native DSD256 and DoP DSD • Phono input for MM or MC with 100 Ω or 47k Ω load • 5 pairs RCA line level inputs, 1 pair XLR balanced input • Balanced XLR and RCA left and right preamp outputs • 1 balanced XLR and 2 RCA subwoofer outputs • 12 Volt trigger output • Kaal: 6,3kg • Mõõdud: 105 x 437 x 432 Learn More -
PARASOUND Zpre3 Two Channel Zone Preamplifier
• Front panel LCD function display with dimming • Automatic turn on volume memory • Favorite volume memory with remote control button • 2-way RS232 w/ exact volume control & feedback • Discrete commands for all functions • Rename inputs to match connected source • 5 audio inputs including a front panel Aux input • Bypass input integrates easily w/ a Sonos Connect® etc • Bass, treble and balance adjustments by remote control • Variable and fixed stereo outputs • Variable and fixed mono/subwoofer outputs • 12dB auto gain offset at front panel AUX to match levels of other sources • 12V trigger output and rear panel IR input • Control4 Driver available • Rack mount kit sold separately Learn More -
PARASOUND A 23+ Stereo Power Amplifier Halo
• 160 watts x 2 @ 8 Ω RMS, both channels driven • 240 watts x 2 @ 4 Ω RMS, both channels driven • 500 watts x 1 @ 8 Ω, in bridged mode • Circuitry designed by legendary John Curl • High bias Class A/AB operation • 45 amperes peak current per channel • Stable with speaker impedance dips below 2 Ω • Balanced inputs with discrete circuits • Heavy-duty 24k gold-plated 5-way speaker binding posts • Gold-plated RCA input & loop output jacks • Direct-coupled signal path, no capacitors or inductors • DC Servo and relay protection circuits • AC turn-on inrush surge protection with relay bypass • JFET input stage, MOSFET driver stage • 12 beta-matched 15 ampere, 60 MHz bipolar output transistors • 1.1 kVA shielded toroid transformer w/ independent windings for each channel • Independent power supplies for input stage, driver stage and output stage • 54,400 µF filter capacitors for output stages • Full power is rated all the way down to 5Hz for unrestricted low-end bass • Harris hyper-fast soft-recovery bridge diode rectifiers • Automatic turn-on by 12 V trigger or audio sensing • 2 rack space chassis with rear carry handles • Rack mount hardware available separately • Available in silver or black • Mõõdud: 437 x 105 x 432 • Kaal: 12.2 kg Learn More -
PARASOUND NewClassic 200 Integrated
110 Watts @ 8 or 4 Ohms Class D amplification by Pascal Burr-Brown 192kHz-24 bit DAC from the Halo P 5 USB, Optical and Coax digital audio inputs 4 Analog audio inputs Phono input for MM or MC cartridges Pure analog signal path from input to output Analog bass management w/ variable 20-140Hz high pass crossover Subwoofer On/Off & level by remote control 80Hz low pass subwoofer output Full range mono output can be used for subwoofer or mono listening area Variable and fixed stereo preamp outputs Bypass input for surround sound or music streamer integration Default turn on volume memory Favorite volume memory with remote control button Input level matching (source volume offset) Bass, treble and balance adjustments by remote control Front panel LCD display with dimming 2-way RS232 w/ exact volume control & feedback Control4 Driver available here Rename inputs to match connected source Front panel Aux input with12dB of additional gain Dedicated headphone amplifier Back-lit remote control with discrete buttons 12V trigger output Learn More -
Parasound NewClassic 200 Pre
• Burr-Brown 192kHz-24 bit DAC from the Halo P 5 • USB, Optical and Coax digital audio inputs • 4 Analog audio inputs • Phono input for MM or MC cartridges • Pure analog signal path from input to output • Analog bass management w/ variable 20-140Hz high pass crossover • Subwoofer On/Off & level by remote control • 80Hz low pass subwoofer output • Full range subwoofer output can also be used for a mono listening area • Variable and fixed stereo outputs • Bypass input for surround sound or music streamer integration • Default turn on volume memory • Favorite volume memory with remote control button • Input level matching (source volume offset) • Bass, treble and balance adjustments by remote control • Front panel LCD display with dimming • 2-way RS232 w/ exact volume control & feedback • Control4 Driver available • Rename inputs to match connected source • 12dB auto gain for front panel AUX to match levels of other sources • Dedicated headphone amplifier • Back-lit remote control with discrete buttons • 12V trigger output Learn More -
PARASOUND NewClassic 275 v.2 Two Channel Power Amplifier
• 90 watts x 2 into 8 Ω (all channels driven) • 150 watts x 2 into 4 Ω or 2 Ω (all channels driven) • 200 watts x 1 bridged into 8 Ω or 4 Ω • 20 amps peak current per channel • 2 Ohm stable operation with load selector switch • Two pairs of speaker outputs with front panel A/B buttons • Rear-mounted lockout switch disables front A/B buttons • High pass filter, switchable for 20Hz or 40Hz • Automatic on/off by DC trigger with looping output • Automatic on/off by audio signal with 2 sensitivity settings • Fully discrete circuitry with high current toroid transformer • Bridging switch for stereo or mono operation • Efficient, low heat design • DC Servo and relay protection circuits • Rear-mounted left and right gain controls • Standby, channel status and high temperature indicators • Gold-plated RCA input jacks • Heavy duty 24k gold-plated 5-way speaker terminals • Mõõdud: 437 x 406 x 63mm • Kaal: 9.1 kg Learn More -
PARASOUND NewClassic 2125 v.2 Two Channel Power Amplifier
• THX Ultra2 certified • 150 watts x 2 into 8 Ω (all channels driven) • 225 watts x 2 into 4 Ω or 2 Ω (all channels driven) • 400 watts x 1 bridged into 8 Ω or 4 Ω • 35 amps peak current per channel • 2 Ohm stable operation with load selector switch • Two pairs of speaker outputs with front panel A/B buttons • Rear-mounted lockout switch disables front A/B buttons • High pass filter, switchable for 20Hz or 40Hz • Automatic on/off by DC trigger with looping output • Automatic on/off by audio signal with 2 sensitivity settings • Fully discrete circuitry with high current toroid transformer • Bridging switch for stereo or mono operation • Efficient, low heat design • DC Servo and relay protection circuits • Rear-mounted left and right gain controls • Standby, channel status and high temperature indicators • Gold-plated RCA input jacks • Heavy duty 24k gold-plated 5-way speaker terminals • Mõõdud: 437 x 406 x 107mm • Kaal: 12.3 kg Learn More -
PARASOUND NewClassic 2250 v.2 Two Channel Power Amplifier
• THX Ultra2 certified • 275 watts x 2 into 8 Ω (all channels driven) • 400 watts x 2 into 4 Ω or 2 Ω (all channels driven) • 750 watts x 1 bridged into 8 Ω or 4 Ω • 45 amps peak current per channel • 2 Ohm stable operation with load selector switch • Two pairs of speaker outputs with front panel A/B buttons • Rear-mounted lockout switch disables front A/B buttons • High pass filter, switchable for 20Hz or 40Hz • Automatic on/off by DC trigger with looping output • Automatic on/off by audio signal with 2 sensitivity settings • Fully discrete circuitry with high current toroid transformer • Bridging switch for stereo or mono operation • Efficient, low heat design • DC Servo and relay protection circuits • Rear-mounted left and right gain controls • Standby, channel status and high temperature indicators • Gold-plated RCA input jacks • Heavy duty 24k gold-plated 5-way speaker terminals Learn More -
PARASOUND JC 1+ Mono Power Amplifier by John Curl
• Power Output • 450 x1 watts @ 8 Ω • 850 x1 watts @ 4 Ω • 1300 x1 watts @ 2 Ω • Circuitry designed by legendary John Curl • Ultra-high bias Class A/AB operation • 25 watts of pure Class A power • Stable with speaker impedance dips below 1Ω • Bybee Music Rails™ - active high frequency filters for input stage • New John Curl driver stage employs a cascode circuit for greater open loop bandwidth & superior linearity • Gain switch to select 29 dB or 23 dB gain for optimum compatibility with high gain preamps or extremely efficient speakers • R-core transformer for input stage suppresses noise on power line • 6 massive 33,000 uF Nichicon Gold Tune filter capacitors for output stage • 22,400 uF input stage power supply filter capacitors, independent of the main power supply • Dual CHK Infinium, custom 5-way speaker binding posts for easy bi-wiring • Neutrik locking XLR balanced input & loop output jacks • Vampire 24k gold-plated RCA input & loop output jacks • Direct-coupled signal path, no capacitors or inductors in the audio path • JFET input stage, MOSFET driver stage • 24 beta-matched 15 ampere, 230V, 60 MHz bipolar output transistors • 2.1 kVA shielded toroid power transformer with premium H18 grade core • Independent power supplies for input stage, driver stage & output stage • Full power is rated all the way down to 2Hz for unrestricted low-end bass • Harris hyper-fast soft-recovery bridge diode rectifiers • REL & Nichicon Muse capacitors • DC servo & relay protection circuits • AC turn-on inrush surge protection with relay bypass • Automatic turn-on by 12 V trigger or audio sensing • 4 rack space chassis with rear carry handles • Rack mount hardware is included • Available in silver or black • Mõõdud: 197 x 435 x 546 mm • Kaal: 37.6 kg Learn More -
PARASOUND JC 2 BP Preamplifier with Bypass
Home theater bypass enables seamless blending into a digital surround system Home theater bypass functions with both unbalanced & balanced inputs and outputs Home theater bypass function can be assigned to any input Bypass remains selected after unit has been turned off Improved remote control is included with the bypass assignment keys Specifications and sonic performance are 100% the same as the original JC 2 6 pairs unbalanced RCA line-level audio input jacks 2 input pairs can be switched to XLR balanced connectors Independent balanced/unbalanced select for the L & R channel Each channel's input is switched by its own gold-on-silver contact relay 4 output jack pairs with specialized functions: 1 Main output jack pair is balanced XLR, polarity is switched by remote 1 Main output jack pair is unbalanced RCA, polarity is switched by remote 1 output jack pair is unbalanced RCA, inverted polarity only 1 output pair is unbalanced RCA, normal polarity, fixed level for recorders Dual-mono left & right channel circuit boards minimize crosstalk Hand-matched complementary FETs Direct DC servo-coupled, no capacitors in the signal path Premium 4-gang motor-driven analog master volume control Separate TKD brand analog gain controls for L & R channel 3/8" thick aluminum shielding around audio boards Shielding prevents noise from power supplies & control circuits Separate output jacks for simultaneous normal & non-inverting polarity Aluminum chassis rear panel Remote control polarity switching uses gold-on-silver contact relays Vampire brand 24k gold-plated RCA jacks Neutrik brand premium XLR connectors Canare brand internal wiring High capacity R-core audio power transformer & inductor Hyper-fast soft recovery audio bridge rectifiers diodes Independent power supply for controller, relay coils, triggers, LEDs Remote control handset controls all functions Discrete IR codes for remote control Four 12v trigger output jacks for power amp auto turn-on: Two 12v trigger jacks are switched by the remote handset Two 12v trigger jacks are live when the JC 2 is turned on • Mõõdud (HWD): 150 x 437 x 406mm • Kaal: 11kg Learn More