Catalog Advanced Search

• 400 watts x 2 @ 8 Ω RMS, both channels driven • 600 watts x 2 @ 4 Ω RMS, both channels driven • 1200 watts x 1@ 8 Ω, in bridged mode • Circuitry designed by legendary John Curl • Ultra-high bias Class A/AB operation • 12 watts per channel of pure Class A power • 90 amperes peak current per channel • Stable with speaker impedance dips to 1.5 Ω • Balanced inputs with discrete circuits • CHK Infinium, custom 5-way speaker binding posts • Neutrik locking XLR input connectors • Vampire gold-plated RCA input & loop output jacks • Direct-coupled signal path, no capacitors or inductors • DC Servo and relay protection circuits • AC turn-on inrush surge protection with relay bypass • Dual-mono input stages with ±110 volt DC rails • JFET input stage, MOSFET driver stage • 24 beta-matched 15 ampere, 60 MHz bipolar output transistors • 1.7 kVA shielded toroid power transformer with independent windings for each channel • Independent power supplies for left & right channel input stages, driver stages, output stages • 8,880 µF Nichicon Gold Tune filter capacitors for input stages • 132,000 µF Rubycon filter capacitors for output stages • Full power is rated all the way down to 5Hz for unrestricted low-end bass • Harris hyper-fast soft-recovery bridge diode rectifiers • Automatic turn-on by 12 V trigger or audio sensing • Mõõdud:197 x 448 x 546 • Kaal: 33.1 kg Learn More

110 Watts @ 8 or 4 Ohms Class D amplification by Pascal Burr-Brown 192kHz-24 bit DAC from the Halo P 5 USB, Optical and Coax digital audio inputs 4 Analog audio inputs Phono input for MM or MC cartridges Pure analog signal path from input to output Analog bass management w/ variable 20-140Hz high pass crossover Subwoofer On/Off & level by remote control 80Hz low pass subwoofer output Full range mono output can be used for subwoofer or mono listening area Variable and fixed stereo preamp outputs Bypass input for surround sound or music streamer integration Default turn on volume memory Favorite volume memory with remote control button Input level matching (source volume offset) Bass, treble and balance adjustments by remote control Front panel LCD display with dimming 2-way RS232 w/ exact volume control & feedback Control4 Driver available here Rename inputs to match connected source Front panel Aux input with12dB of additional gain Dedicated headphone amplifier Back-lit remote control with discrete buttons 12V trigger output Learn More

• Burr-Brown 192kHz-24 bit DAC from the Halo P 5 • USB, Optical and Coax digital audio inputs • 4 Analog audio inputs • Phono input for MM or MC cartridges • Pure analog signal path from input to output • Analog bass management w/ variable 20-140Hz high pass crossover • Subwoofer On/Off & level by remote control • 80Hz low pass subwoofer output • Full range subwoofer output can also be used for a mono listening area • Variable and fixed stereo outputs • Bypass input for surround sound or music streamer integration • Default turn on volume memory • Favorite volume memory with remote control button • Input level matching (source volume offset) • Bass, treble and balance adjustments by remote control • Front panel LCD display with dimming • 2-way RS232 w/ exact volume control & feedback • Control4 Driver available • Rename inputs to match connected source • 12dB auto gain for front panel AUX to match levels of other sources • Dedicated headphone amplifier • Back-lit remote control with discrete buttons • 12V trigger output Learn More

• THX Ultra2 certified • 150 watts x 2 into 8 Ω (all channels driven) • 225 watts x 2 into 4 Ω or 2 Ω (all channels driven) • 400 watts x 1 bridged into 8 Ω or 4 Ω • 35 amps peak current per channel • 2 Ohm stable operation with load selector switch • Two pairs of speaker outputs with front panel A/B buttons • Rear-mounted lockout switch disables front A/B buttons • High pass filter, switchable for 20Hz or 40Hz • Automatic on/off by DC trigger with looping output • Automatic on/off by audio signal with 2 sensitivity settings • Fully discrete circuitry with high current toroid transformer • Bridging switch for stereo or mono operation • Efficient, low heat design • DC Servo and relay protection circuits • Rear-mounted left and right gain controls • Standby, channel status and high temperature indicators • Gold-plated RCA input jacks • Heavy duty 24k gold-plated 5-way speaker terminals • Mõõdud: 437 x 406 x 107mm • Kaal: 12.3 kg Learn More

• THX Ultra2 certified • 275 watts x 2 into 8 Ω (all channels driven) • 400 watts x 2 into 4 Ω or 2 Ω (all channels driven) • 750 watts x 1 bridged into 8 Ω or 4 Ω • 45 amps peak current per channel • 2 Ohm stable operation with load selector switch • Two pairs of speaker outputs with front panel A/B buttons • Rear-mounted lockout switch disables front A/B buttons • High pass filter, switchable for 20Hz or 40Hz • Automatic on/off by DC trigger with looping output • Automatic on/off by audio signal with 2 sensitivity settings • Fully discrete circuitry with high current toroid transformer • Bridging switch for stereo or mono operation • Efficient, low heat design • DC Servo and relay protection circuits • Rear-mounted left and right gain controls • Standby, channel status and high temperature indicators • Gold-plated RCA input jacks • Heavy duty 24k gold-plated 5-way speaker terminals Learn More

• 90 watts x 2 into 8 Ω (all channels driven) • 150 watts x 2 into 4 Ω or 2 Ω (all channels driven) • 200 watts x 1 bridged into 8 Ω or 4 Ω • 20 amps peak current per channel • 2 Ohm stable operation with load selector switch • Two pairs of speaker outputs with front panel A/B buttons • Rear-mounted lockout switch disables front A/B buttons • High pass filter, switchable for 20Hz or 40Hz • Automatic on/off by DC trigger with looping output • Automatic on/off by audio signal with 2 sensitivity settings • Fully discrete circuitry with high current toroid transformer • Bridging switch for stereo or mono operation • Efficient, low heat design • DC Servo and relay protection circuits • Rear-mounted left and right gain controls • Standby, channel status and high temperature indicators • Gold-plated RCA input jacks • Heavy duty 24k gold-plated 5-way speaker terminals • Mõõdud: 437 x 406 x 63mm • Kaal: 9.1 kg Learn More

PARASOUND P 6 • Frequency Response:10 Hz - 100 kHz, +0/-3 dB; 20 Hz - 20 kHz, +0/-0.5 dB • Burr-Brown analog resistor ladder volume control • Dimmable front panel volume display • Coax & optical inputs accept PCM up to 192kHz/24-bit • USB input decodes Native DSD256 and DoP DSD • Phono input for MM or MC with 100 Ω or 47k Ω load • 5 pairs RCA line level inputs, 1 pair XLR balanced input • Balanced XLR and RCA left and right preamp outputs • 1 balanced XLR and 2 RCA subwoofer outputs • 12 Volt trigger output • Kaal: 6,3kg • Mõõdud: 105 x 437 x 432 Learn More

PARASOUND stereovõimendi Zamp v.3 • Võimsus: 45W @8Ω 60W @4Ω 90W @8Ω bridged • Sagedus: 5 Hz - 100 kHz, +0/-3 dB • Kõrvaklapiliides • 9-12V Trigger • Kaal 3,0 kg • Mõõdud mm: 50 x 241 x 254 (K x L x S) • Viimistlus: must Learn More

• Universal amplifier for applications from 60 to 150 watts • Zone 1 (channel 1&2) are higher power for more demanding applications • 24 speaker connections (A and B outputs for all 12 channels) • High current for stable operation at 2 Ohms • Class AB input stage plus premium Class D power stage • Independent audio sensing triggers, one for each zone • 6 Independent 12 volt trigger inputs, one for each zone • Looping 12 volt trigger outputs for each zone • Master 12 volt trigger input to turn all zones on-off • Speaker level input for expanding systems w/out pre out jacks • Two bus inputs can be routed to any zone • Bus loop output jacks for passing audio to another amp • Summed Mono mode combines L and R for single speaker applications • Separate level controls for all twelve channels • Detachable speaker connectors accept up to 12 gauge wire • Short circuit and overheat protection with front panel indicators • 0.5 watt standby power consumption meets Energy Star & EU specs Learn More