Lõppvõimendid
-
VINCENT SP-332 Hybrid Stereo Poweramplifier
VINCENT SP-332 Hybrid Stereo Poweramplifier • Frequency Response: 20 Hz - 20 kHz +/- 0.5 dB • Nominal Output Power RMS / 8 Ohm: 2 x 150 Watt • Nominal Output Power RMS / 4 Ohm: 2 x 250 Watt • Harmonic Distortion: < 0.1 % (1 kHz, 1 Watt) • Input Sensitivity: 1.35 Volt • Signal-Noise Ratio: > 91 dB • Input Impedance: 47 kOhm • Max. Power Consumption: 531 Watt • Inputs: 1 x Stereo RCA, 1 x Stereo XLR, 1 x 3.5 mm Jack (Power Control) • Outputs: 2 x 4 Speaker Terminal, 1 x 3.5 mm Jack (Power Control) • Tubes: 2 x 6N16, 1 x 6N15 • Colour: Black / Silver • Weight: 21 kg • Dimensions (W x H x D): 430 x 165 x 430 mm Learn More -
KLIPSCH KDA-1000 4 kanaliga 70/100V/4Ω tsoonivõimendi
KLIPSCH KDA-1000 4 kanaliga tsoonivõimendi • 1000W Total System Power (4 x 250W) • High performance power platform • 70V / 100V / Low Impedance Compatibility • Mõõdud: 44mm x 483mm x 363mm • Kaal : 6.82 kg Learn More -
Artsound ART1.1 Bluetooth võimendi
• Kompaktsed mõõtmed • Bluetooth • Ideaalne väikestesse ruumidesse • Väljundvõimsus RMS 2 x 10 W 8Ω / 2 x 15 W 4 Ω • Mõõtmed 159,5 x 54 x 35,5 mm • Kaal/tk 0,21 kg Learn More -
PARASOUND Zamp v.3 stereovõimendi
PARASOUND stereovõimendi Zamp v.3 • Võimsus: 45W @8Ω 60W @4Ω 90W @8Ω bridged • Sagedus: 5 Hz - 100 kHz, +0/-3 dB • Kõrvaklapiliides • 9-12V Trigger • Kaal 3,0 kg • Mõõdud mm: 50 x 241 x 254 (K x L x S) • Viimistlus: must Learn More -
PARASOUND NewClassic 275 v.2 Two Channel Power Amplifier
• 90 watts x 2 into 8 Ω (all channels driven) • 150 watts x 2 into 4 Ω or 2 Ω (all channels driven) • 200 watts x 1 bridged into 8 Ω or 4 Ω • 20 amps peak current per channel • 2 Ohm stable operation with load selector switch • Two pairs of speaker outputs with front panel A/B buttons • Rear-mounted lockout switch disables front A/B buttons • High pass filter, switchable for 20Hz or 40Hz • Automatic on/off by DC trigger with looping output • Automatic on/off by audio signal with 2 sensitivity settings • Fully discrete circuitry with high current toroid transformer • Bridging switch for stereo or mono operation • Efficient, low heat design • DC Servo and relay protection circuits • Rear-mounted left and right gain controls • Standby, channel status and high temperature indicators • Gold-plated RCA input jacks • Heavy duty 24k gold-plated 5-way speaker terminals • Mõõdud: 437 x 406 x 63mm • Kaal: 9.1 kg Learn More -
PARASOUND ZoneMaster 12 Universal 12 Channel 24 Speaker Amplifier
• Universal amplifier for applications from 60 to 150 watts • Zone 1 (channel 1&2) are higher power for more demanding applications • 24 speaker connections (A and B outputs for all 12 channels) • High current for stable operation at 2 Ohms • Class AB input stage plus premium Class D power stage • Independent audio sensing triggers, one for each zone • 6 Independent 12 volt trigger inputs, one for each zone • Looping 12 volt trigger outputs for each zone • Master 12 volt trigger input to turn all zones on-off • Speaker level input for expanding systems w/out pre out jacks • Two bus inputs can be routed to any zone • Bus loop output jacks for passing audio to another amp • Summed Mono mode combines L and R for single speaker applications • Separate level controls for all twelve channels • Detachable speaker connectors accept up to 12 gauge wire • Short circuit and overheat protection with front panel indicators • 0.5 watt standby power consumption meets Energy Star & EU specs Learn More -
TEAC AP-701 Stereo/Mono Power Amplifier
• Two Ncore power modules made by Hypex Electronics B.V. And tuned especially for this model • High output with a practical maximum of 260 W + 260 W (4 Ω)/170 W + 170 W (8 Ω) • Dual mono design throughout entire system • Clean signal amplification realized with a fully balanced design at the input stage • Two independent left/right high-capacity toroidal core power supply transformers • Discrete buffer amplifiers used in the input stage • Three supporting pinpoint feet that are easy to install (patent numbers 4075477 and 3778108) • Two linked VU meters which show musical pulse; with four dimmer levels and two sensitivity settings • Fan-free design to minimize noise • 12V trigger in and through for power synchronization Learn More -
NAD CI 16-60 DSP Multi-Channel Amplifier
• 16 Channels X 60 Watts @ 8 Ohms • Any consecutive channel pair bridgeable to 2 x 140 Watts @ 8 ohm • 2U Rack Height- saves valuable rack space • Platform accessed through IP control • Effectively handles long cable runs and difficult speaker loads • Dual global Inputs/Outputs • 5W Standby Mode, 3W Network Standby • 12V Trigger In; IR In/Out Learn More -
HEGEL H20 lõppvõimendi
• Output power: More than 200 W + 200 W in 8 ohms, Dual mono • Inputs: RCA unbalanced and XLR balanced • Speaker outputs: Two pairs of heavy-duty gold plated terminals • Input Impedance: Balanced 10 kohm, unbalanced 50 kohm • Frequency response: Less than +/- 0.2 dB deviation 20 Hz - 20 kHz • Phase response: Less than 2 degrees deviation 20 Hz - 20 kHz • Finish: Black • Dimensions/weight: 145 x 430 x 370 (HxWxD), weight 18 kg Learn More -
PARASOUND JC 5 Stereo Power Amplifier by John Curl Halo
• 400 watts x 2 @ 8 Ω RMS, both channels driven • 600 watts x 2 @ 4 Ω RMS, both channels driven • 1200 watts x 1@ 8 Ω, in bridged mode • Circuitry designed by legendary John Curl • Ultra-high bias Class A/AB operation • 12 watts per channel of pure Class A power • 90 amperes peak current per channel • Stable with speaker impedance dips to 1.5 Ω • Balanced inputs with discrete circuits • CHK Infinium, custom 5-way speaker binding posts • Neutrik locking XLR input connectors • Vampire gold-plated RCA input & loop output jacks • Direct-coupled signal path, no capacitors or inductors • DC Servo and relay protection circuits • AC turn-on inrush surge protection with relay bypass • Dual-mono input stages with ±110 volt DC rails • JFET input stage, MOSFET driver stage • 24 beta-matched 15 ampere, 60 MHz bipolar output transistors • 1.7 kVA shielded toroid power transformer with independent windings for each channel • Independent power supplies for left & right channel input stages, driver stages, output stages • 8,880 µF Nichicon Gold Tune filter capacitors for input stages • 132,000 µF Rubycon filter capacitors for output stages • Full power is rated all the way down to 5Hz for unrestricted low-end bass • Harris hyper-fast soft-recovery bridge diode rectifiers • Automatic turn-on by 12 V trigger or audio sensing • Mõõdud:197 x 448 x 546 • Kaal: 33.1 kg Learn More